P4-SVCP VFD Control Panels

More than 60% of all reported support calls and problems associated with electronic dispensers arise from poor electrical installation. The reliability and safe efficient function of your LPG station is your life blood. It if doesn’t work, you’re losing money. Hours and dollars spent on initial installation and down-time troubleshooting only make the losses greater. When building new Autogas stations with pumps requiring 3 phase power, but only 230vac single phase is available, it is even more complicated.

The ParaFOUR P4-SECP VFD series integrated Station Electrical Control Panels, is the solution. Integrating ALL electrical control elements into a single rack or panel mount box, to centralize all control of the station. The FVD control panel line is capable of 3 phase service from a single phase 230 vac site. The VFD gives the additional benefit of soft starts with programmable ramp up, contributing to longer pump and motor life (should be used with inverter or drive rated motors) they are designed for running larger Autogas Fleet & Retail stations with 2 or more dispensers and 1 pump with 5-7.5hp three phase motors. Options for multiple pumps are available.

Features:

-NEMA 4/12 metal exterior enclosure, with integrated ventilation and cooling fans, thermostat controlled
-Available from 5-7.5 HP VFD (rated at 10-15 hp for duty factor)
-Mounting size 41” x 24” x 12” (base models)
-UL listed enclosure and components
-Galvanized back plane with DIN rail mounted components
-Main breaker for pump controls (base model 40 amps)
-Motor starter / Disconnect with current limit integrated
– Manual reset on overload protection
-Through door disconnect, “Lock-Out-Tag-Out” capable
-Emergency Stop Button, breaks ALL power to the station which depressed, terminals for remote E-STOP in series
-Dispenser isolation relays to protect dispensers from back feed voltage
-1-10 second time delay in motor start to delay pump start when opening internal valves
-6 Amp breaker for dispenser, rated for P4-Series dispensers with all options installed, 6 amp breaker for fuel management systems (expandable)
-Optional auxiliary 6 Amp breaker for third party card readers
-Optional LED Pilot light for run indication
-DIN rail mounted terminals for easy connections, room for future expansion
-All connection points labeled
–Satisfies all NFPA and NEC requirements for single point station control
-Prewired and assembled to individual station specifications. Units built to order based on site specifications.